The main precautions for surface grinder operation are:

Surface grinder positioning. The surface grinder should be reserved for more than three hundred millimeters outside the large moving space. Each foot screw is tight, check every three months, adjust the level of the work surface, and tighten each foot screw.

Surface grinder grinding wheel. The selected grinding wheel must be able to withstand a peripheral speed of 2000 m/min or more. It is also forbidden to use damaged wheels. The new wheel must be balanced on the flange. The grinding wheel needs to be idling for 5 minutes before the formal grinding.

Surface grinding machine spindle. Before installing the grinding wheel, make sure that the spindle rotates clockwise. When starting up, first open the spindle and then start flushing.

Surface grinder hydraulics. The new machine needs to be replaced with hydraulic oil after three months of use, and then replaced once a year, and the tank must be cleaned. Check the hydraulic oil level every day and the oil level should be between the lower and upper lines. Before starting the hydraulic motor, make sure that the flow speed control lever is in the closed position.

Surface grinder lubrication device. Check the fuel tank volume every day to ensure that it is above the line. Check the rail oil circuit for smoothness every week to prevent the rail from losing oil. It is recommended to clean the tank every three months. Grease is regularly refilled as specified.

The left and right mechanism of the surface grinder. It is forbidden to adjust the left and right strokes while the table is in motion. When the workbench cable is loose, it should be adjusted immediately.

Surface grinder flushing and vacuuming device. The filter box filter must be cleaned every two weeks. The cold water tank must be cleaned once a month.