Today's surface grinders are used extensively, so many times, when we operate a surface grinder, because of the extensive grinding technology, the correct surface grinder operation is the premise to ensure the safety of the operator. When starting work, apply the manual adjustment method to make the grinding wheel slower and closer to the workpiece. The starting feed rate should be small, and the force should not be too strong to prevent the grinding wheel from colliding. When it is necessary to use the iron stop to control the reciprocating motion of the worktable, it is necessary to accurately adjust the length of the workpiece according to the grinding length of the workpiece and tighten the retaining iron.

Therefore, the safety technology work of grinding processing is particularly important. When processing, it is necessary to adopt reliable safety protection devices. The operation should concentrate on the spirit of concentration and ensure that nothing is lost. At the same time, the fine sand and metal scraps splashed on the workpiece of the grinding wheel during the grinding of the surface grinder can damage the eyes of the operator. If the operator inhales the dust in a large amount, it will be harmful to the body. Protective measures. Pay attention to the following safety technical issues when grinding.

Grinding is one of the main methods for precision machining of machine parts. However, because the grinding wheel has a very high rotational speed, the grinding wheel is relatively hard, brittle, and cannot withstand heavy impacts. Careless operation is not correct, and crushing the grinding wheel can cause very serious consequences. The grinding machine should be thoroughly inspected before starting the machine, including inspection of the steering mechanism, electrical equipment and magnetic chucks. After the inspection, it is lubricated, and after lubrication, the test is carried out to confirm that everything is good before use.

Plane grinding machine operation, need to master three major elements

During the operation of the surface grinder, we must pay attention to the observation to ensure that the function of the grinder is normal and reliable, so that it can run for a long time. For the operator, there are three main elements to master the surface grinder:

1. The precise configuration of the grinding wheel, different material grinding wheel is shaken with different grinding wheel, the grinding wheel is shaken with sharp diamond pen repair, the grinding wheel speed should be adjusted when the grinding wheel is finished, and the sharpness of the grinding wheel can be adjusted to grind the workpiece. Smoother;

2, the grinding machine is hygienic, a grinding machine can be used for a long time, it can be used for a long time. This requirement is very important. It seems to be ordinary, but it must be persevered, and the clothes are neat and clean. The table is clean and the people are comfortable to operate the grinder. And the cleanness makes the machine tool constant, the precision can be maintained, and the products made can be highly precise!

3, surface grinder feel control, feel depends on years of experience to operate, in the same master operating the same grinder, the workpiece is not the same, grooving when finishing, fine grinding, polishing products should be careful, slow work out skilled work.